Angles |
Top Angles — Sets the angle between the highest face and the ground plane, Other Angles — Sets the side face angle relative to the ground plane,
Bottom Angles — Sets the angle that the lowest face makes with respect to the ground plane.
The Options are:
- Angle — Specifies the number in degrees of the angle between the base shape and the face of the form.
- Entering 0.00 results in a face perpendicular to the shape’s base;
- a negative value produces an angle greater than 90 degrees;
- a positive value produces an angle less than 90 degrees.
- Horizontal — The face is parallel to the global XY plane.
If you select Horizontal for a face that cannot be horizontal, the face is constructed vertically.
- Vertical — The face of the form is perpendicular to the global XY plane.
If you select Vertical for a face that cannot be vertical, the face is constructed horizontally.
|
Thickness |
Specifies the thickness of the extruded slab. |
Tolerance |
Controls how many segments comprise a curve: Increasing the value creates fewer segments; decreasing the value creates more segments. |
Reverse |
Reverses the direction of extrusion. |
Delete Constructions |
If on, the element from which the form is extruded is deleted.
|