Room Type Manager: Window recess panel
Contains controls used to define recesses around windows for rooms of the selected room type. The recesses defined here represent the distances between the edges of the window surface to the actual glazing of the window, typically due to the window framing.
Note: Window recess data
on subsequently created rooms of the selected room type can be edited
individually using the corresponding window recess controls found on the
Properties For: Window
dialog box or globally using the controls found on the
Global Changes
dialog box’s Windows data panel. Detailed window recesses and
reveals are defined for AECOsim Building Designer at the application level in the Default
Manager dialog box’s
Window frames and reveals
panel.
Tip:
Units Display – Units are displayed using the
default system of units that was defined for the project, but can be
changed to display using
alternative units.
Setting | Description |
---|---|
Top distance | Sets the distance from the top of the window opening or frame to the start of the window glazing |
Top overhang | Sets the recess distance at the top of the window. The distance is measured from the top of the window’s surface opening to the window glazing. |
Side recess | Sets the recess distance on the sides of the window. The distance is measured from the side of the window’s surface opening to the window glazing. |