Select Type
|
Choose the method of specifying wind pressure values from the
drop-down:
- Custom – ASCE 7 or other
user-specified wind pressures
Setting | Description |
---|
Intensity vs. Height table |
Enter pairs of data for wind pressure at a
given height (in the current units). Int cells – 力/面積で表された風強さ(圧力)。タイプごとに最大100の異なる強さを入力ファイルで定義できます。
Height cells – 対応する強さが生じる全体垂直方向の対応する高さ。実際のY(Z upの場合はZ)座標で測定されます。
|
Calculate as per ASCE 7 |
Opens the ASCE-7 Wind Load dialog, which is
used to generate a wind load per the ASCE 7
specification. Input data on the type of structure,
surrounding terrain, and wind. |
- SNiP
2.01.07-85 or SP
20.13330.2016 – Russian wind load parameters
Setting | Description |
---|
Pressure |
風圧の特性値(常に正の値)
|
Terrain |
地形粗度カテゴリ:
- 沿岸地域。
- 都市圏。
- 大都市。
|
Region |
SNiP 2.01.07-85* 2016の条項11.5に規定されている風域。動的な風の成分を決定する際に風圧を決定する目的で使用します。
|
Delta |
振動の対数減少、デルタ(定義については表11.5 - 条項11.1.8を参照)。通常、値は次のとおりです。
- 鉄塔、マスト、煙突群、鉄筋コンクリート台座を含む柱は0.15
- 鉄筋コンクリートおよび石造構造物、および壁構造がある鉄骨構造の建物は0.3
|
- GB 50009-2012 - Chinese wind load parameters
Setting | Description |
---|
Generate Wind Load |
Opens the Generate Wind Definition and Wind
Load Case for Chinese GB 50009 dialog,
which is used to enter code parameters for generating
wind intensity values based on the GB 50009 2012
code. |
|