Zoom All
|
Zoom out so that all the walls in the Wall Design Group are visible. |
Zoom Fence
|
Zoom in by specifying a rectangle in the view. |
Zoom In
|
|
Zoom Out
|
|
Zoom Previous
|
|
3D View
|
Switch to 3D view. |
Elevation View
|
Switch to elevation view. After selecting this button, select a Wall to serve as the plane of the viewing elevation. |
Orthographic
|
Use orthographic projection to display the Walls. |
Perspective
|
Use perspective projection to display the Walls. |
Keyboard Rotates
|
Use the arrow keys to rotate the view. Note that left and right rotate about the model's Z axis, so when looking down from above, the view will rotate clockwise or counterclockwise. Holding down the <Ctrl> key while using the arrow keys in this mode, causes the view to pan instead of rotate |
Keyboard Pans
|
Use the arrow keys to pan the view. Holding down the <Ctrl> key while using the arrow keys in this mode causes the view to rotate instead of pan. |
Mouse Selects Section Cut
|
Click on any section cut to select it. The selected section cut will be reflected in the design pane, the status bar, and any section-cut specific tabs in the information pane. |
Mouse Selects Rebar
|
Click on any rebar to select it. This will highlight the corresponding row in the appropriate Vertical or Horizontal tab in the Reinforcing tab of the information pane. |
Mouse Pans
|
Click and drag with the left mouse button to pan the view. Holding down the <Ctrl> key while dragging in this mode causes the view to rotate instead of pan. |
Mouse Rotates
|
Click and drag with the left mouse button to rotate the view. Unlike keyboard rotation, dragging left and right rotates the view to the left or right based on the current orientation. Holding down the <Ctrl> key while dragging in this mode causes the view to pan instead of rotate. |