Initial Service
- Tendons are considered as an external load (and the balance loading is assumed to be included in the load factors).
- The reinforcement type (as defined in the design section or design strip segment) is considered (PT or RC).
- The stress levels in the structure are determined by the moment envelope for the rule set (reinforcement may be required on both faces).
- Code Rules are applied as shown in the following table
Table 1. Initial service rule
mapping
Design System
|
RC
|
PT
|
Beam
|
(none)
|
9.3.4.2
|
One-Way Slab
|
(none)
|
7.3.4.2
|
Two-Way Slab
|
(none)
|
8.3.4.1
|