Complete the steps in "Define the manual latitude tendons Pt. 1" before proceeding.
With the Tendon Polyline tool () selected, draw a tendon along grid A:
Click at the center of the column at grid intersection A-1.
Click at the center of the column at A-2.
Click at the center of the column at A-3.
Right click, and then click Enter.
Double click the Tendon Polyline tool () to edit its default properties.
In the Default Tendon Properties dialog box:
Set Strands per Tendon to 21, and click OK.
With the Tendon Polyline tool () selected, draw a tendon along grid B:
Click at the center of the column at grid intersection B-1.
Click at the center of the column at B-2.
Click at the center of the column at B-3.
Click at the center of the column at B-5.
Right click, and then click Enter.
With the Tendon Polyline tool () selected, draw a tendon along grid C:
Click at the center of the column at grid intersection B.8-1.
Click at the center of the column at C-2.
Click at the center of the column at C-3.
Click at the center of the column at C-4.
Right click, and then click Enter.
The latitude tendons are drawn but you need to adjust a number of profile points. Any profile point at the end of a tendon should be at the mid-depth of the 10-inch slab.
Proceed immediately to "Define the namual latitdue tendons Pt. 3".